ER309L
AWS A5.9 ER309L
Description：
A super low carbon stainless steel welding wire has high deposition efficiency, used for joining similar 309L alloys or for joining 300-series stainless steels to carbon or low alloy steels. The low carbon content to help prevent intergranular corrosion. Used to weld super low carbon 24%Cr13%Ni and similar stainless steels, like ASTM 309S etc.
Diameters:
0.8mm,0.9mm,1.0mm,1.2mm.
Typical Mechanical Properties:
Tensile strength(MPa): | 625 |
Yield stress(MPa): | 435 |
Elongation(%): | 37 |
Typical Chemical Properties:
C | Mn | P | S | Si | Ni | Cr | Mo | Cu |
0.011 | 1.95 | 0.012 | 0.008 | 0.55 | 13.8 | 23.5 | 0.011 | 0.010 |
Welding Current:(AC/DC+)
Diameter(mm) | 0.8 | 0.9 | 1.0 | 1.2 | |
Current/A | 55-160 | 65-220 | 80-240 | 100-300 | |
Voltage/V | 15-24 | 15-28 | 15-28 | 15-29 | |
Note:
1.Rusty, oil stains, water and other impurity on the weld parts must be cleaned before welding.
2.Shield Gas:Ar+0.5-5%CO2 or Ar+0.5-3%O2.
3.Gas speed:20-25L/Min
4.DC+ connection; Arc length:4-6mm.
5. Tig rods ER309L 1.6mm, 2.0mm, 2.4mm, 3.2mm available
