ER80S-D2
AWS A5.28 ER80S-D2
Description:
ER80S-D2 is a low alloy copper-coated tig rod with 0.5% Mo content designed for welding low-alloy steels with high tensile strength and creep resistance. It shows good impact strength at low temperatures and suitable for pipelines and pressure vessels with operating temperatures of about 500°C. It will also find applications for the repair of medium strength steel castings
Diameters:
1.2mm
Typical Mechanical Properties:
Tensile strength(MPa): | 720 |
Yield stress(MPa): | 610 |
Elongation(%): | 27 |
Impact values(≥27J/-20℃): | 76 |
Typical Chemical Properties:
C | Mn | P | S | Si | Mo | Cu |
0.08 | 1.90 | 0.010 | 0.008 | 0.70 | 0.50 | 0.15 |
Welding Current:
Diameter(mm) | 0.8 | 1.0 | 1.2 | 1.6 | |
Current/A | F/H | 50-200 | 80-250 | 100-360 | 170-390 |
Current/A | V/OH | 50-140 | 80-160 | 80-220 | -- |
Note:
1. Rusty, water, oil and other impurity should be cleaned before welding.
2. Shield gas: 80%Ar+20% CO2.
3. Gas speed: 15-25L/Min
4. Tig rods ER80S-D2 1.6mm, 2.0mm, 2.4mm, 3.2mm available