ER110S-1
AWS A5.28 ER110S-1
Description：
ER110S-1 is cooper coated low alloy solid wire for welding high strength steels with yield strength up to 890MPa. Can be used as well as for welding grade S960 and featured with good impact toughness value down to -60°C
Diameters:
1.2mm
Typical Mechanical Properties:
Tensile strength(MPa): | 950 |
Yield stress(MPa): | 850 |
Elongation(%): | 15 |
Impact values(≥27J/-40℃): | 72 |
Typical Chemical Properties:
C | Mn | P | S | Si | Mo | Cr | Ni |
0.09 | 1.80 | 0.010 | 0.012 | 0.80 | 0.55 | 0.30 | 2.20 |
Welding Current:
Diameter(mm) | 1.0 | 1.2 | 1.6 | |
Current/A | F/H | 80-250 | 100-360 | 170-390 |
Current/A | V/OH | 80-160 | 80-220 | -- |
Note:
1. Rusty, water, oil and other impurity should be cleaned before welding.
2. Shield gas: 100%CO2 or 80%Ar+20% CO2.
3. Gas speed: 15-25L/Min
4. Tig rods ER110S-1 1.6mm, 2.0mm, 2.4mm, 3.2mm available
